Setting up port forwarding in your Vodafone Easybox
To access your camera through the internet you will need a portforwarding service inside your router. For more general information about the ddns access please refer to HERE.
To access the user interface of your router open the following address with your internet browser http://192.168.2.1 . The default login is username = root or admin and password = 123456. Navigate to the Port Mapping in the "Data" tab and click on the Edit symbol under Configure (s. Screenshot above).
Type your cameras IP address into the field "LAN IP". You can find your cameras IP address using our IP Camera Tool. Set both the LAN and Public Port to the port you want to operate your camera on. The cameras default port ist 80. Click on Enter Symbol under Configure to save the service.
The service is now active.
Your camera can now be reached via the ddns address that can be found under System/Info in your cameras user interface (s. above). In case the port 80 is already taken in your network you will have to change the camera port under Network/Basic Network Settings and of course adjust the portforwarding service to the new port.
If you are using more then one camera you have to also create another Port rule for each camera.Please make sure that the Öffentliche Port is always different for each port forwarding. For example if you are using Port 80 for the first camera then the second camera should have the Port 81 and the third camera Port 82 and so on.
To open each camera you would type in something like this:
- Camera 1
- Camera 2
and so on...
Note: You can access all cameras with only one internet address. Only the Port at the end has to be changed. Therefore, you do not have to remember all DDNS addresses of the camera. You only need to remember one address.