720p Serie CGI List


IP Camera CGI Introduction

CGI listed in this file which is provided for your INSTAR IP camera, is an interface based on the HTTP protocol and the client application (e.g. a webpage in your web browsers or other applications). You can make various operations on the device by this set of CGI commands.

CGI authentication: to access below CGI commands you need to authenticate your user level. Different CGI commands need different authority: visitor, operator or admin. The authentication is handled over the http protocol by attaching the user name and password directly to the CGI parameter. Example:

/cgi-bin/hi3510/cleanlog.cgi?usr=admin&pwd=instar

All the CGI commands support GET and POST operation - except upgrade.cgi and restore.cgi, which can only be used in a POST operation.

GET Example:

<form name="form2" method="get" action="cgi-bin/hi3510/cleanlog.cgi">
<input name="cururl" type="hidden" >
<input name="name" type="hidden" value="access"></form>

POST Example:

<form name="form5" method="post" target="retframe" enctype="multipart/form-data"action="cgi-bin/hi3510/upgrade.cgi" onSubmit="return upgrade()">
<input type="file" name="setting_file">
<input type="submit" value=" submit"> </form>

CGI Return:

Depending on the returned info, the returns can be divided into two cases.

GET CGI of device status and parameter, if successful,will return plain txt which includes the device status or parameter. The format is specified as javascript and every status or parameter as a variable:

var bps_1="2048";
var fps_1="25";
var gop_1="50";
var brmode_1="1";
var imagegrade_1="1";
var width_1="704";
var height_1="576";

If the GET fails, it will return:“[Error]GET video attribution error! errcode is 0xa10e6008”. Set device parameter will return plain txt including the result of the operation. If successful, the return will be HTTP/1.0 200 OK. If the operation fails an error message will be returned, like: [Error][Data-Length:91] unrecognized or incomplete command line..

CGI commands can be typed into your web browsers address line directly for testing.

List of the most common CGI commands

Both ways to authenticate are valid - e.g. for:

  • user = admin
  • password = instar
http://admin:instar@IP ...
... &usr=admin&pwd=instar

Both are used interchangeable in this documentation!

Video & Snapshot

  • VLC Stream (High Resolution)
    • rtsp://admin:instar@IP-Address:RTSP-Port/11
  • VLC Stream (Medium Resolution)
    • rtsp://admin:instar@IP-Address:RTSP-Port/12
  • VLC Stream (Low Resolution)
    • rtsp://admin:instar@IP-Address:RTSP-Port/13
  • Snapshot (720p)
    • http://IP-Address:Port/tmpfs/snap.jpg?usr=admin&pwd=instar
  • Snapshot (352p)
    • http://IP-Address:Port/tmpfs/auto.jpg?usr=admin&pwd=instar
  • Snapshot (176p)
    • http://IP-Address:Port/tmpfs/auto2.jpg?usr=admin&pwd=instar
  • MJPEG Stream 11
    • http://IP-Address:Port/mjpegstream.cgi?-chn=11&-usr=admin&-pwd=instar
  • MJPEG Stream 12
    • http://IP-Address:Port/mjpegstream.cgi?-chn=12&-usr=admin&-pwd=instar
  • MJPEG Stream 13
    • http://IP-Address:Port/mjpegstream.cgi?-chn=13&-usr=admin&-pwd=instar

Also note the additional SDK documentation for accessing video / audio

Pan & Tilt

  • Moves continuously right
    • http://IP-Address:Port/cgi-bin/hi3510/ptzctrl.cgi?-step=0&-act=right
  • Moves continuously left
    • http://IP-Address:Port/cgi-bin/hi3510/ptzctrl.cgi?-step=0&-act=left
  • Moves continuously up
    • http://IP-Address:Port/cgi-bin/hi3510/ptzctrl.cgi?-step=0&-act=up
  • Moves continuously down
    • http://IP-Address:Port/cgi-bin/hi3510/ptzctrl.cgi?-step=0&-act=down
  • Stops moving camera-head
    • http://IP-Address:Port/cgi-bin/hi3510/ptzctrl.cgi?-step=0&-act=stop
  • Moves one step right
    • http://IP-Address:Port/cgi-bin/hi3510/ptzctrl.cgi?-step=1&-act=right
  • Moves one step left
    • http://IP-Address:Port/cgi-bin/hi3510/ptzctrl.cgi?-step=1&-act=left
  • Moves one step up
    • http://IP-Address:Port/cgi-bin/hi3510/ptzctrl.cgi?-step=1&-act=up
  • Moves one step down
    • http://IP-Address:Port/cgi-bin/hi3510/ptzctrl.cgi?-step=1&-act=down
  • Go to Center Position
    • http://IP-Address:Port/cgi-bin/hi3510/ptzctrl.cgi?-step=0&-act=home
  • Scan horizontal
    • http://IP-Address:Port/cgi-bin/hi3510/ptzctrl.cgi?-step=0&-act=hscan
  • Scan vertical
    • http://IP-Address:Port/cgi-bin/hi3510/ptzctrl.cgi?-step=0&-act=vscan
  • Set a position
    • http://IP-Address:Port/cgi-bin/hi3510/preset.cgi?-act=set&-status=1&-number=[0-7]
  • Unset a position
    • http://IP-Address:Port/cgi-bin/hi3510/preset.cgi?-act=set&-status=0&-number=[0-7]
  • goto to a set position
    • http://IP-Address:Port/cgi-bin/hi3510/preset.cgi?-act=goto&-status=1&-number=[0-7]

Image

  • Sets the Image Parameter
    • http://IP-Address:Port/cgi-bin/hi3510/param.cgi?cmd=setimageattr

You can set the following parameters:

  • brightness :: [0 - 255] the bigger the value the brighter the image
  • saturation :: [0 - 255] the bigger the value the more saturation the image has
  • contrast :: [0 - 255] the bigger the value the more contrast the image has
  • hue :: [0 - 127] the bigger the value the more hue the image has
  • flip :: [on , off] flips the image
  • mirror :: [on , off] flips the image
  • scene :: [auto , indoor , outdoor] sets the white balance mode

Example:

  • WLAN
    • http://IP-Address:Port/cgi-bin/hi3510/param.cgi?cmd=setimageattr&-brightness=0&-saturation=0&-contrast=0&-hue=0&-flip=off&-mirror=off&-scene=auto
  • Reset the Parameter Values
    • http://IP-Address:Port/cgi-bin/hi3510/param.cgi?cmd=setwirelessattr

Example:

  • IR-LED
    • http://IP-Address:Port/cgi-bin/hi3510/param.cgi?cmd=setwirelessattr&-wf_ssid=SSID&-wf_enable=0&-wf_auth=2&-wf_key=1234&-wf_enc=1&-wf_mode=0
  • Sets IR LED's to auto mode
    • http://192.168.178.87/cgi-bin/hi3510/param.cgi?cmd=setinfrared&-infraredstat=auto
  • Sets IR LED's always active :: only IN-6011
    • http://192.168.178.87/cgi-bin/hi3510/param.cgi?cmd=setinfrared&-infraredstat=open
  • Sets IR LED's always inactive
    • http://192.168.178.87/cgi-bin/hi3510/param.cgi?cmd=setinfrared&-infraredstat=close

Alarm

  • trigger an alarm on your camera
    • http://admin:instar@192.168.xxx.xxx/cgi-bin/hi3510/param.cgi?cmd=pushhostalarm
  • enables the md area 1
    • http://admin:instar@192.168.xxx.xxx/cgi-bin/hi3510/param.cgi?cmd=setmdattr&-enable=1&-name=1
  • disables the md area 1
    • http://admin:instar@192.168.xxx.xxx/cgi-bin/hi3510/param.cgi?cmd=setmdattr&-enable=0&-name=1
  • enable / disable external alarm in to trigger recording
    • http://192.168.x.x/cgi-bin/hi3510/param.cgi?cmd=setioattr&-io_enable=1&-io_flag=1

Example:

  • Camera Model
    • http://admin:instar@192.168.xxx.xxx/cgi-bin/hi3510/param.cgi?cmd=setmdattr&-enable=0&-name=1&cmd=setmdattr&-enable=0&-name=2&cmd=setmdattr&-enable=0&-name=3&cmd=setmdattr&-enable=0&-name=4

Installing the wrong Firmware can overwrite your camera Identification. Use the following commands to reset your camera model:

  • Set your Camera Model

    • http://192.168.178.133:83/param.cgi?cmd=get_instar_guest&-index=47
  • Get set camera model

    • http://192.168.178.133:83/param.cgi?cmd=set_instar_guest&-index=47&-value=6014
  • Set PoE or WiFi Model:

    • http://192.168.178.133:83/param.cgi?cmd=get_instar_guest&-index=48
  • Get PoE variable :: PoE (true) or WLAN (false)

    • http://192.168.178.133:83//param.cgi?cmd=set_instar_guest&-index=48&-value=false

If PoE is true, the WiFi menu will not be displayed!