IN-9408 2K+ black

About this firmware

New features in version 5.2.1 [1497]: aa

• Fixed PIR unmute issues after changing night vision-related settings
• Restored support for superfloppy-formatted SD cards, which had stopped working since version 5.0.0-5.0.0
• Fixed SD card saving of quick-access snapshots, introduced with the previous update, for users without Full permissions
• Updated underlying systems with the latest security patches

Show older changelogs: aa

New features in version 5.2.0 [1481]:

• The file extension for FTP-related image uploads can now be configured as either between .jpg and .jpeg
• Changing FTP settings no longer restarts the entire upload service, avoiding a brief interruption
• Fixed FTP uploads occasionally appearing incomplete due to a timing issue
• Capturing a manual snapshot using the quick-access Snapshot button now also saves the image to the SD card
• Password recovery now returns "Not Available" when the provided email doesn't match or the feature is not available
• Added support for initial Wi-Fi setup via QR code after a factory reset
• Improved audio echo-cancellation efficiency
• Fixed a crash when sending emails with multiple snapshot attachments
• Fixed a crash that could occur during certain network setting changes
• Fixed an issue where the login process could appear unsuccessful
• Fixed a bug that could cause the camera to become unresponsive to PTZ controls
• Fixed an issue where setting the device's date/time via ONVIF could fail or set the wrong timezone for certain regions
• A bug affecting zoom control via ONVIF was fixed
• General bug fixes and performance improvements

New features in version 5.1.0 [1413]:

• The Wi-Fi key in the Web UI now supports up to 63 characters
• The EAP username and password now support up to 255 characters
• The Setup Wizard and Captive Wi-Fi Setup now support EAP configuration
• More reliable Wi-Fi EAP testing, which could previously return false error results
• The camera now correctly applies country-specific Wi-Fi regulatory restrictions
• Fixed an issue with alarm zones and privacy zones so that they can now be configured even when the live stream is stopped
• General bug fixes and performance improvements

New features in version 5.0.1 [1382]:

• Fixed an issue that prevented access to files on the SD card
• The Wi-Fi functionality on the IN-8415 2K+ model has been restored after it was lost in the last update.
• IN-9420 2K+ and IN-9820 4K models that were updated from version 4.0.2 or older to version 5.0.0 or revisions up to 1380 may no longer have been controllable manually. This update resolves the issue.
• Fixed an issue where the recalibration button in the PTZ control bar did not respond under certain circumstances

New features in version 5.0.0 [1376]:

• Updated the underlying system platform and SoC components
• Improved system stability when using object detection
• TLSv1.2 support has been temporarily reintroduced to ensure compatibility with older ONVIF clients
• Supports the Frigate AI-NVR autotracking function for PTZ cameras
• Improved IPv6 support in the Alarm Server, MQTT, and FTP menus
• Improvements and bug fixes related to PTZ control
• PTZ recalibration can now be performed directly through the WebUI without a reboot
• Improved detection and automatic repair of corrupted data on the SD card
• Authentication can now be disabled separately for RTSP and RTSPS in the RTSP menu
• Optimisations for faster initial loading of the WebUI
• Relaxed password requirements: Most previous requirements are now treated as recommendations and are reflected in the password rating system
• Fixed an issue that prevented EAP Wi-Fi networks from being fully configured through the WebUI Wi-Fi menu
• Colours can now be selected in the privacy mask color picker even if no hue was previously specified and only a contrast value had been selected
• A factory reset can now be triggered via the SD card. Create a file named "reset" on the SD card to perform a partial reset, or "resetAll" to perform a full reset including all network configuration
• General bug fixes and performance improvements

New features in version 4.1.1 [1315]:

• An issue where the IN-9X20 camera no longer moved to the park position when object tracking was enabled has been fixed
• A display error in the dropdown selection that showed an incorrect return position for object tracking has been resolved
• Fixed an issue where, with privacy mode enabled and the camera name hidden, the camera would no longer start after updating to version 4.1.0
• General bug fixes and performance improvements

New features in version 4.1.0 [1306]:

• Object tracking for the camera models IN-9420 2K+ and IN-9820 4K
• If PIR and areas are not linked, alarm areas (if configured) will still be used for object detection, meaning an object must overlap with one of the alarm areas
• Replacement of the AI model for faster and more precise object detection
• Fixed an issue so that the pre-recording time is correctly considered during an alarm
• Improvement in restoring the live video within the web interface
• Saving the digital zoom level for cameras without optical zoom
• Fixed a bug that prevented host verification when using the sFTP service
• Increased the maximum number of possible video streams to 6 (previously 3)
• A manual snapshot (image) is now correctly created in the highest resolution again
• Fixed an issue where privacy masks could no longer be modified in certain situations
• Interval for images on the SD card during an alarm can now be adjusted more precisely
• Fixed an issue that could cause the autofocus on IN-9X20 models to be interrupted
• General bug fixes and performance improvements

New features in version 4.0.2 [1265]:

• Fixed a display issue in the new SD card viewer on Chrome and Edge when using touch-enabled devices
• Resolved an issue where alarm areas were not shown under the menu Alarm => Areas when the alarm widget was enabled
• Fixed a problem with step-by-step control where the camera moves beyond the intended step
• Corrected an error where a failed connection to the update server returned 0 as the latest firmware version, triggering an unnecessary MQTT update notification

New features in version 4.0.1 [1251]:

• The pre-alarm recording time is now prepended to each alarm event, even if a planned, scheduled, manual or even another alarm recording is already running
• Fixed an issue where using MQTT could cause an internal camera restart
• A connection issue related to HomeKit has been resolved
• Fixed a display problem on tablet devices when using landscape orientation
• Fixed an issue in the setup wizard where passwords containing the + character were not handled correctly. A login with the chosen password was not possible
• Resolved a problem that occurred after updating from an older firmware version (≤ 2.2.0), where the default admin user would lose administrator privileges

New features in version 4.0.0 [1246]:

• Database structure for recordings on the SD card to improve visualisation of alarm details in the SD Card Viewer. In addition, navigation within the SD Card Viewer has been revised, and recordings can now be filtered by specific alarm conditions. After the update, you will be prompted to perform a database synchronization upon your first login
• MQTT Auto-Discovery integrated for Home Assistant and other smart home systems
• Transfer of an image via MQTT is now possible, including resolution and interval options
• Tilt angle extended to 100° (previously 90°) for models IN-9420 / IN-9820
• Pan/Tilt speed can now be adjusted for models IN-9420 / IN-9820
• Step size for manual focus on models IN-9420 / IN-9820 has been reduced for finer control
• Stepwise control for Pan/Tilt can now be enabled on models IN-9420 / IN-9820, allowing the camera to move by a single step per click. When the direction button is held down during stepwise control, the camera moves continuously until the button is released
• For controllable camera models, you can now configure the camera to start a patrol (tour) after reboot instead of returning to a single fixed position
• Fixed an issue with MQTT where topics were no longer being updated
• Significantly improved speed of initial MQTT topic registration with the MQTT broker
• Stationary objects are now better detected as part of the object detection process to reduce false alarms
• Automatic renewal of the camera’s built-in TLS certificate can now be disabled if desired
• The number of images sent via email upon an alarm can now be set to 0, so that only a notification email is sent (without images)
• The image included in push notifications can now optionally be disabled
• New CGI command for requesting an AI prediction: /param.cgi?cmd=getmodelprediction&count=8&model=movingobjects, also available via MQTT using the topic alarm/triggered/objects/manual with the value {"val":"movingobjects"} - More details: https://forum.instar.com
• When retrieving a snapshot via snap.cgi from third-party systems, unknown parameters are now ignored at the end of the request
• For ONVIF, WS-Security authentication is now automatically enabled during setup in the WebUI for improved compatibility with other ONVIF devices
• Adjustments and improvements related to HomeKit as part of the certification process
• Updated log font for improved readability and a clearer overview
• General bug fixes and performance improvements

New features in version 3.11.1 [1124]:

• Files and folders on the SD card can now be deleted directly via the SD Viewer
• PIR-controlled night vision can now optionally activate either the infrared light or the spotlight (for models IN-8403 / IN-9420 / IN-9820)
• HomeKit support for switching the spotlight (for models IN-8403 / IN-9420 / IN-9820)
• The spotlight duration when activated via the quick access icon has been increased to 120 seconds. If not manually turned off, the floodlight will switch off automatically
• A bug has been addressed that could cause the camera(s) on models IN-9420 / IN-9820 to become unresponsive to control commands
• Improvement for photo series: On controllable cameras, image capture after a reboot now only begins after the start position has been reached
• SMTP credentials can now be left empty to support servers without authentication
• Time zones now use UTC instead of GMT
• General bug fixes and performance improvements

New features in version 3.10.0 [1089]:

• Improved loading time of the live video
• Certificate for the INSTAR DDNS address is now updated automatically
• HomeKit is enabled by default – in preparation for certification
• Fixed an issue that could cause a crash when there are multiple simultaneous connections
• Fixed an autofocus issue related to the start position
• General bug fixes and performance improvements

New features in version 3.9.0 [1042]:

• The camera now broadcasts its own Wi-Fi signal (“Captive Wi-Fi”) when in factory default mode, allowing Wi-Fi credentials to be entered easily – no network cable required
• Autofocus mode can now be selected in the PTZ settings. Available options include an automatic day/night mode, as well as a consistently fast or precise focus
• A bug was fixed where the IN-9420 and IN-9820 cameras would incorrectly move to the top-right position during the first direction control after a cold start
• Optimizations to the RTSP stream to ensure the video is available as quickly as possible
• Fixed an issue with RTSP when audio is disabled
• Fixed a problem during import of backups that could lead to an error related to the Push ID
• The snapshot included with push notifications — a feature introduced in the previous version — can now be optionally disabled
• The time zone is now automatically taken from the web browser during the setup wizard
• Fixed an issue in the setup wizard where no warning was shown if the username or password contained umlauts or other non-ASCII characters, which are not allowed
• General bug fixes and performance improvements

New features in version 3.8.0 [1017]:

• HomeKit now with significantly shorter loading times for live video, support for Apple Watch, and two-way audio (preparation for HomeKit certification)
• Implemented IPv6 DNS via SLAAC and added display of Gateway & DNS addresses in the WebUI
• Expanded the list of secure NTP servers
• Added stepwise and absolute control for the IN-9420 2K+ & IN-9820 4K models
• Thumbnails (preview images) are now also stored on the SD card, preparing for app integration and direct viewing on the SD card
• Autofocus on the IN-9420 2K+ & IN-9820 4K is now automatically triggered with every position change. This function can be adjusted under "Features → Pan&Tilt"
• YouTube video tutorials are now directly accessible from the help pages of each menu section (click the (?) in the respective menu)
• SelfHOST has been added as an additional third-party DDNS provider
• Maximum keyframe interval increased to up to 200 frames.
• General bug fixes and performance improvements

New features in version 3.7.0 [957]:

• Object detection data is now transmitted as a JSON object via MQTT and to the alarm server
• Toggle buttons to activate and deactivate functions have been replaced by switches to more clearly indicate what is activated or deactivated
• Disabled alarm areas can now be hidden in the settings
• The Privacy menu now displays the live video in the background
• Fixed issue with incorrect year in the filename that occurred on December 30th and 31st, 2024
• Fixed issue where scheduled recordings to the SD card were not resumed
• The IR-Cut filter now stays in night mode when the PIR switch for night vision is activated
• Improvement in triggering linked alarms
• Improvement in follow-up recordings to minimize gaps between recordings
• Fixed issue with HTTP to HTTPS redirection
• General bug fixes and performance improvements

New features in version 3.6.0 [937]:

• Real-time status changes of widgets for WhiteLight, Tour, Relay, and manual recording
• Alarm areas menu now shows live video in the background and you can assign names to each alarm area
• Automatic update-check can be disabled in the update menu
• Fixed an issue where scheduled alarm areas could not be activated
• When creating new users, a QR code is now generated that allows the new user to add the camera in the InstarVision app
• MQTT client ID and topic prefix now support up to 48 characters in the WebUI
• General bug fixes and performance improvements

New features in version 3.5.0 [914]:

• Newly trained algorithm for object detection for even better recognition and adjustment of the default object match value
• Detected objects are once again returned in the MQTT topic 'status/alarm/triggered/object'
• Switched to the exFAT file system for the MicroSD memory card to increase compatibility with large memory cards. To use this, formatting the memory card is necessary after applying the update
• Push notification schedule added
• Secondary DNS is now purely optional and is no longer set in advance
• Uploading multiple CA certificates at once is possible. They are now automatically merged, with each upload replacing the previous certificate collection
• The IN-9420 2K+ now allows an unlimited number of PTZ tour runs
• The dwell time at the parking position can now be set in seconds (15-900s)
• Fixed an issue with flickering IR and White-Light LEDs in certain situations
• Fixed an issue when sending emails that could occur with some providers
• Adjusted ONVIF so that PTZ is automatically preset, as some clients require this to use camera controls
• WDR mode is now activatable in night vision and available in some presets
• UTF8 support for the alarm notification email text
• General bug fixes and performance improvements

New features in version 3.4.0 [883]:

• Extended alarm areas to a total of 8 areas
• Extended the alarm server to transmit all triggers – More info can be found HERE
• Day/night-specific alarm areas can now be defined under "Alarm => Schedule"
• Scheduled control of the relay under "Tasks => Relay schedule"
• Scheduled creation and transmission of snapshots (SD, Email or FTP) under "Tasks => Snapshot schedule"
• New prefix "S..." for scheduled snapshots
• Scheduled positioning with PTZ cameras under "Tasks => Position schedule"
• Editing and assigning names for saved positions on PTZ cameras is now possible
• Improvements to the autofocus of the IN-9420 2K+
• Fixed an issue where the stream would drop out under large image changes (e.g. day-night transition)
• Fixed an issue with WDR strength 3 caused by the last firmware update
• Fixed an issue that caused an authentication error when using different devices under the same DDNS address
• Fixed an issue where emails were not sent if the sending interval was too short
• The time zone for Kazakhstan has been updated
• General bug fixes and performance improvements

New Features in Version 3.3.1 [+849]:

• A problem with certain special characters in the ONVIF menu and the password selection in the "Reset Password" function has been fixed
• General bug fixes and performance improvements

New Features in Version 3.3.0 [+844]:

• The port settings now have their own tab in the "Network - IP Configuration" menu, allowing all ports to be viewed and configured clearly
• Optionally, a forwarding to HTTPS can be enabled so that access via HTTP is automatically redirected to HTTPS
• In addition to the configured HTTPS port, port 443 can be enabled to automatically forward to the configured HTTPS port
• Maximum interval for FTP & SMTP snapshots has been increased to one day (86400 sec)
• The CGI cmd=getptzstate has been extended and now also returns the current position
• MQTT commands have been expanded to include getlightstrength for reading / setting the LED brightness and stopalarmsound for manually stopping the alarm sound
• Open Wi-Fi networks are now correctly identified and labeled as such
• The start position of the IN-9420 should now always be correct after a restart
• The park position is now correctly reached after the end of the PTZ tour
• The issue of duplicate snapshots has been resolved
• Improvements have been made to multicast and the camera's discoverability when connected to Wi-Fi
• The labeling of the alarm output (relay open/closed) has been corrected, as well as an issue with the widget updating the relay status
• The alarm areas and boundary frames of the object detection are now correctly displayed in the livestream at all zoom factors of the digital zoom
• General bug fixes and performance improvements

New Features in Version 3.2.1 [+804]:

• Increased stability of the stream in the web browser to prevent interruptions
• Implemented brightness control for IR and white light LEDs
• Digital zoom now shows the entire image with a highlighted, movable section
• Enabling recording on FTP or cloud no longer automatically activates recording on the SD card
• Fixed a logic error when using different time periods under "Alarm => Schedule"
• Corrected an issue with the SD card that occasionally showed 0MB. If your SD card is affected or not working, please format it through the camera. The problem should not reoccur afterwards
• Fixed an issue with retrieving events via ONVIF: When an Unsubscribe is sent, open pull requests are now correctly terminated
• Fixed issues with zooming via ONVIF
• General bug fixes and performance improvements

New Features in Version 3.2.0 [+782]:

• Initial support of IPv6 has been added (IP assignment currently via SLAAC only)
• The INSTAR DDNS address supports both IPv4 and IPv6 when IPv6 is enabled
• The DDNS update now also supports IPv6 with third-party DDNS providers
• More on the benefits of IPv6 and instructions for direct remote access to the WebUI via IPv6 can be found in the help section under 'Network - IP Configuration'
• Update of the SSL certificate for the integrated INSTAR DDNS address
• Disabling autofocus is now optionally possible for the IN-9420 2K+ model
• Improvements in the transmission of the RTSP video stream
• Integration of Secure RTSP for even more secure live video transmission
• Issues with audio transmission have been resolved
• General bug fixes and performance improvements

New Features in Version 3.1.1 [+760]:

• Authentication issues with WS-Security-UsernameToken in time zones currently observing Daylight Saving Time have now been resolved
• A recently added issue has been resolved where the special character + no longer worked in cloud login
• Another recently added issue has been resolved that previously prevented the custom SSL certificate from being activated directly via the WebUI
• General bug fixes and performance improvements

New Features in Version 3.1.0 [+754]:

• ONVIF now supports WS-Security UsernameToken authentication, enabling older ONVIF clients to function smoothly. It is recommended to create a new user account for ONVIF if you want to use this feature
• CGI command now allows setting permissions for uploaded files for SFTP uploads. Overwritten files retain the original setting
• A problem has been fixed that caused the image correction to be incorrectly applied after switching to night mode
• In the logbook, alarm triggers now appear first, followed by the actions they triggered
• General bug fixes and performance improvements

New Features in Version 3.0.1 [+745]:

• A problem in the setup wizard after a factory reset was fixed, which prevented skipping the update and also displayed the wrong update status
• General bug fixes and performance improvements

New Features in Version 3.0.0 [+733]:

• New customizable user rights
• Added a new menu "Features - Man. Recording" for setting resolution, duration, and pre-record time for manually triggered recordings
• In "Alarm - Schedule," in addition to the master schedule, you can now set an individual schedule for alarm zones, PIR, alarm input, audio alarm, and relay (alarm output)
• Switched the WebUI login to Digest Authentication
• The alarm input and output can now be controlled via ONVIF (for models with I/O)
• Revision of the cloud login via WebUI for increased security
• Custom headers for the alarm server can now be set via CGI
• Interval for the photo series can now be set from previously 3600 seconds to one day (86400 seconds) to save a picture once a day
• Fixed a PTZ problem that could cause the stop command to be processed incorrectly
• UTF8 support for position names at PTZ positions
• MQTT adjustments to newly integrated functions
• Added a quick access button to play the alarm sound
• General bug fixes and improvements
• [WARNING] For access via the InstarVision app, download the latest version from your smartphone's AppStore or from the Microsoft Store.
• [WARNING] Backups must be recreated; importing old backups is not possible
• [WARNING] Downgrading the firmware (<3.0.0) is no longer possible for security reasons
• [WARNING] The CGI command ptzpreset has been removed and replaced by get / setptzpreset
• [WARNING] The labeling of N.O. and N.C. at the alarm input (for models with I/O) has been corrected; adjust if necessary after the update if you use it.

New Features in Version 2.2.1 [+698]:

• A problem that hindered the control of digital zoom has been fixed
• The control for the video element is now available again via right-click on the video

New Features in Version 2.2.0 [+694]:

• The Ad-Hoc mode was added to the WLAN menu. It is now possible for the camera to create a WLAN network and connect your devices (e.g., smartphone) directly to the camera.
• Alarm polygons have been introduced, replacing the old rectangular areas. Polygons with up to 32 vertices can be drawn to adjust the precise shape of your intended alarm area. To add or remove vertices, please hold the [Shift] key on your keyboard and click on the desired position or the vertex you wish to remove from your alarm area.
• Improved stability and general improvements for the RTSP stream.
• Improved ONVIF support with third-party devices (e.g., Synology, QNAP, ...).
• Changes to the scheduled recording settings now immediately stop the current scheduled video recording. A new recording will then be started with the new settings.
• The FTP test function will now take into account the directory settings for FTP uploads.
• Settings for manual recordings have been introduced. More details in the CGI list!
• General bug fixes and performance improvements.

New Features in Version 2.1.2 [+676]:

• A problem with the sensitivity of motion detection in night mode has been fixed.
• The phenomenon that devices from newer productions without an SD card in the SD card slot did not boot completely has been resolved. Devices now boot with or without an inserted SD card.
• General bug fixes and performance improvements.

New Features in Version 2.1.1 [+671]:

• Bugfix that prevented the triggering of alarms immediately after moving to a PTZ position in the IN-9420 camera model.
• Bugfix regarding the logging of features not supported by some models.
• Alarm input events now return ID 5 during the alarm server push request.
• General bug fixes and performance improvements.

New Features in Version 2.1.0 [+663]:

• The sensitivity of motion detection has been improved.
• Lens Distortion Correction (LDC) for correcting distortions in wide-angle lenses is now available in the image settings.
• The lead time for alarm recordings can now be set within a range of 0 to 10 seconds.
• The automatic restart can now be set to a specific day of the week.
• The maximum adjustable limits for the day/night switch have been increased.
• Improvements in the zoom and focus control for the new IN-9420 2K model.
• When mirroring the image, the direction of pan & tilt movement is automatically adjusted.
• General bug fixes and performance improvements.

New Features in Version 2.0.1 [+650]:

• Optimization of sound detection for more reliable alarm triggers.
• In sound detection, the duration of the sound required to trigger the alarm can now be set.
• The first upload of the photo series now starts upon activation of the function. Previously, file upload began after the first time interval was completed.
• Compatibility with multiple email recipients has been restored.
• A problem in the photo series was fixed, where the camera might not upload images via FTP after restarting.
• General bug fixes and performance improvements.

New Features in Version 2.0.0 [+645]:

• Introduction of separate day/night settings for fine-tuning.
• Improvement of WDR functionality and image quality for even better quality.
• Adding WPA2/WPA3 Enterprise (PEAP/TTLS) for enhanced security.
• Connecting to hidden WLAN networks is now possible.
• Connections to WLAN networks that do not require a password are now allowed.
• Fixing an SFTP issue that led to unexpected restarts.
• Bug fixes for P2P that prevented video loading have been resolved.
• Integration of a contact form directly into the web interface for added convenience.
• Significant backend improvements in preparation for new features.
• The direction of pan and tilt control can now be reversed.
• The CGI command cmd=ptzpreset is outdated and has been replaced by the two commands cmd=setptzpreset and cmd=getptzpreset. The cmd=ptzpreset command will no longer be supported in the future.
• General bug fixes and performance improvements.

New Features in Version 1.5.3 [+608]:

• A problem has been fixed where the camera stopped recording after an indefinite period of operation.
• A problem has been fixed where PoE cameras without a physical LAN connection did not start properly, making operation with a 12V power supply and without a LAN cable impossible.
• General bug fixes and improvements.

New Features in Version 1.5.2 [+603]:

• Pan and tilt control via ONVIF.
• Issues with the calibration drive of the IN-8415 2K+ have been fixed, where it was possible that the central position was not correctly approached.
• Higher WLAN data transfer rate during PKG and online updates.
• The problem in MESH networks, such as with a Fritz!Repeater, where the camera would not log into the network after multiple channel changes, has been fixed.
• Clicking the 'Save' button in the snapshot overlay now saves the currently displayed image instead of creating a new snapshot.
• MQTT translations have been updated.
• General bug fixes and improvements.

New Features in Version 1.5.1 [+583]:

• The problem with delayed video stream, reported by some users with certain clients, has been fixed.
• The problem with the IR cut filter has been corrected, where the camera might have had the wrong IR cut state immediately after a restart. This was noticeable by a purple tint.
• An exception for the SD path has been added concerning the transmission of compressed data.
• MQTT translations have been updated.
• General bug fixes and improvements.

New Features in Version 1.5.0 [+576]:

• The problem with importing backups via the web interface has been successfully fixed.
• The digital zoom function is now available for all cameras without a zoom lens.
• Support for the new INSTAR cameras has been added.
• The problem that made the ONVIF menu inaccessible after configuring ONVIF on the HTTP port has been fixed.
• Compressed data transmission for certain file types has been enabled.
• The issue with alarm triggering via the microphone has been fixed when the audio options AEC (Active Echo Cancellation) and ANR (Active Noise Reduction) were activated.
• General bug fixes and improvements.

New Features in Version 1.4.2 [+539]:

• HomeKit Secure Video - Get the most out of your Apple devices with HomeKit support.
• HomeKit-compliant LED handling when HomeKit is active.
• The minimum security protocol is now configurable for MQTT.
• MQTT now supports encrypted WebSocket connections.
• The SSL certificate has been updated.
• The roles of additional users from the default state are now customizable.
• The reliability of ONVIF has been increased.
• The compatibility of the RTSP stream for third-party devices has been improved.
• Email subject for the photo series is now adjustable in the email menu under features.
• Improved touch support for mobile devices in the object detection threshold menus.
• The system startup is now faster.
• General security updates.
• General bug fixes and improvements.

New Features in Version 1.4.1 [+515]:

• Additional IR diodes can be activated during an alarm in supported models.
• Preparation for new camera models.
• General bug fixes and improvements.

New Features in Version 1.4.0 [+512]:

• Revision of the privacy menu - It is now possible to define non-rectangular areas up to 8 areas. Note that the CGI API has changed in this area!
• Improved touch support for mobile devices in area menus.
• Revision of user management - Up to 10 users can now be created.
• Every user can now edit their personal login.
• Active sessions of a user are now deleted as soon as their user data changes.
• Compatibility for 8403 2K+ and 8415 2K+ models.
• Noise filter for the microphone is now available in the audio menu.
• Echo cancellation for the audio channel is now available.
• Video encoding is now freely adjustable for all three video channels.
• The smallest resolution (channel 13) has been increased to 720p (HD) and the encoding is set to H264 by default.
• P2P library has been updated - An update of the Instarvision APP is required to ensure smooth P2P connection.
• Alarm data is now transmitted in parallel to live video over the WebSocket connection.
• iPad compatibility with HomeKit has been improved.
• Issues that affected the reliability of HomeKit have been resolved.
• A problem that sometimes hindered FTP uploads has been fixed.
• Quality-of-Service (QoS) option has been added to MQTT.
• The maximum length of a video file for manual and scheduled recordings is now 15 minutes.
• General bug fixes and improvements.

New Features in Version 1.3.3 [+476]:

• DDNS support for model IN-8401 2K+.

New Features in Version 1.3.2 [+464]:

• Up to four servers can now be specified for Secure NTP.
• Improvements in the HomeKit and Onvif implementations.
• MQTT translations have been updated.
• General bug fixes and improvements.

New Features in Version 1.3.1 [+449]:

• Issues in HomeKit regarding alarm notifications and simultaneous access from multiple iOS devices have been fixed.

New Features in Version 1.3.0 [+445]:

• H265 video stream support (1440p & 360p) for Google Chrome.
• The "My Account" menu allows each user to adjust their account settings.
• The language setting is now part of the account setting.
• Two-factor authentication (2FA) for added security at login.
• User password can now be reset at login.
• 2FA and password reset require the user to have their email address set in the new "My Account" menu.
• Secure NTP (also known as NTS/NTPsec) is now available as an alternative to NTP.
• Two additional alarm servers with their own configuration can now be contacted.
• A test function has been added to the alarm server to simulate the request with the desired triggers and to test the connection to the server.
• The sorting of Wi-Fi results now occurs as expected by signal quality.
• The reliability of the HomeKit connection has been improved.
• General bug fixes and improvements.
• We recommend clearing your web browser's cache after this update!

New Features in Version 1.2.0 [+414]:

• Protection against brute force attacks.
• Stricter HTTP security headers.
• New object detection menu! Set the minimum & maximum size and the matching threshold for the individual object types!
• Digital zoom can now be applied to the live video.
• Innovations and bug fix in the alarm server menu. Alarm triggers can be individually deactivated to block the alarm push request from certain triggers.
• The schedules for the photo series and continuous recording have been decoupled from the master schedule, which serves as an overarching schedule for the alarm schedules.
• Connections to unprotected Wi-Fi networks are now allowed.
• Files and folders in the root directory of the SD card that were not created by the camera are excluded from the automatic deletion of SD data.
• Email photo series has been added.
• RTSP can now be disabled. RTSP settings are now in the RTSP menu.
• Test function for alarm server and MQTT (CGI).
• HomeKit log function has been added (CGI).
• MQTT & ONVIF updates.
• New languages have been added to the WebUI.
• General bug fixes and improvements.

New Features in Version 1.1.1 [+380]:

• Stricter password requirements.
• The UI assesses the security level of the password and provides suggestions for improvement.
• The steps in the wizard have been rearranged, and an update step has been added.
• Experimental: Implementation for minimum & maximum size for object detection has been revised (CGI).
• An issue with email sending has been fixed.
• An issue with scheduled continuous recording has been fixed.
• The reliability of ONVIF has been increased.
• General bug fixes and improvements.

New Features in Version 1.1.0 [+367]:

• Alarm areas can now be individually coupled with the PIR.
• An issue with the PIR-controlled night mode has been fixed.
• For developers: Alarm & object information is included in the video data stream.
• Experimental: Minimum & maximum size for object detection can be defined via CGI.
• General bug fixes and improvements.

New Features in Version 1.0.4 [+358]:

• An issue in user management in the WebUI has been fixed.
• General bug fixes and improvements.

New Features in Version 1.0.3 [+356]:

• The changelog is accessible in the update menu.
• An issue with logical linking in object detection has been fixed.
• For object detection, the threshold at which an object is identified can now be controlled in the alarm configuration.
• The background color for privacy areas is now configurable.
• The camera name is now displayed in the browser title.
• The reliability of email dispatch has been increased.
• The stability of the P2P connection has been improved.
• General bug fixes and improvements.

New Features in Version 1.0.2 [+349]:

• An issue was fixed that prevented saving the alarm server configuration with less than 5 query parameters.

New Features in Version 1.0.1 [+348]:

• The WebUI now loads correctly in the operator and guest accounts.
• An issue in user management was fixed, which sometimes made it impossible to edit all 3 users simultaneously.
• An issue with emails has been fixed.
• The reliability of HomeKit has been increased.
• General bug fixes and improvements.