|
Firmware 3.1.2.69 WebUI 1.21 (752)
(Date:
10.09.2019)
(Read me...PLEASE)
|
|
Latest Firmware and WebUI Bundle
Download the newest firmware version for your INSTAR HD camera on the left side and unpack the downloaded ZIP file. Once unpacked you will find a "update.pkg" file. Please open the web interface of your camera inside the web browser and go to "Software - Upgrade" and select the "update.pkg" file in order to upload it to your camera. Press submit and wait for about 12 minutes until the update is complete. Below we show you an overview of the new INSTAR Cloud platform which is now available (currently the video is only in German, but the platform itself is also available in English):
New Features in version 1.21 (752):
- Alarm recordings up to 45 seconds
- Touch support for drawing alarm areas
- The alarm area will be specified in the log when using linked alarm
- PUSH test button added. Push must be activated and QR code must be scanned prior to using the test button
- WiFi and network settings can now be exempted from the factory reset
- An alarm event can be triggered by the following CGI command - /param.cgi?cmd=pushhostalarm
- When using DHCP, camera will claim an unique DHCP hostname
- Built-in recovery functionalities to restore cameras with a failed update. Downgrades will be limited to this exact version
- General bugfixes and layout changes
Important notice for update FW 3.1.2.66, WebUI 1.19:
The firmware is now saving all settings before the update and restores them after the update. Please note, that therefor the update can take up to 12 minutes. Usually the update is done after 7-8 minutes. Never unplug the power during an update, stay relaxed... the camera will need a certain time to restore the old settings during the update process.
Show older changelogs:
What is new in version 1.20 ?
- Simple 1-Click update method
- Offline update with traditional PKG file is optionally available
- Alarm areas can be activated at preconfigured times
- General bugfixes and layout changes
What is new in version 1.19 ?
- Fixed a problem with P2P
- General bugfixes and layout changes
What is new in version 1.17 ?
- Fixed problem during automatic summer / winter changeover
- Fixed problem with which the alarm sound could not be deactivated for IN-6014HD
- New validation integrated for input fields
- Security gap closed
- General bugfixes and layout changes
What is new in version 1.16 ?
- Problem fixed with P2P connection
- Enhancements for the P2P connection speed
- The INSTAR Cloud Recording platform is now available, for more information see:
https://cloud.instar.de
- User defined NTP time server is now possible
- Problem solved with FTP upload
- Problem solved with authentification when using MJPEG stream or snap.jpg
- Problem solved that the camera will not restart after changing a port
- Special character problem solved for Wifi, DDNS, FTP and Cloud passwords
- Language Strings have been adjusted
- Problem solved with cloud activation
- General bugfixes and layout changes
What is new in version 1.13 ?
- The INSTAR Cloud Recording platform is now available, for more information see:
https://cloud.instar.de
- LAN and Wifi Mac address will now be both shown under "System - Info" (if your camera model has Wifi)
- The preselection for GMX as the SMTP server was adjusted from mail.gmx.net to mail.gmx.de to prevent problems with the Telekom Speedport Router
- General bugfixes and layout changes
What is new in version 1.12 ?
- Alarm Server
- Scheduled daily reboot
- Email SMTP without authentication
- Introducing new Wizard
- User & Guest Accounts can be disabled
- Syslog translations
- Fixed issue with deleting camera name completely
- H264 videos support for all ports in user and guest view
- Fixed issue with certain email providers (e.g. GMX, web.de, Gmail, AOL)
- Fixed issue where alarm input, audio alarm and motion detection did not work if activated at the same time
- General bugfixes and layout changes
For all Pan and Tilt cameras:
- Park Position for PTZ models
What is new in version 1.11 ?
- New h.264 video-stream using the RTMP protocol via the new RTMP Port (see Network > IP Configuration) which supports Flash Plugin
- fTwo different MotionJPEG streams:
1. MJPEG (Single-Image-Video directly from the camera - NEW and more robust)
2. JPEG (Single-Image-Video directly from the Web Browser - works with every HTML Browser)
- Privacy Mask - You can set up to 4 Areas that are completely 'blacked' out in the live video
- Camera Settings are not deleted with an Update
- H.264 Video Support for Linux via Flash (e.g. with Chromium)
- Manual SD Card Recording via the Web Interface
- Two different FTP folder modes:
1. All Files in one directory
2. Create a new folder every day
- You can manually open (grey) and close (red) the alarm output relay using the web user interface (not available for IN-6001HD and IN-6014HD)
- New and improved Software Updater (only available after this Update)
- Camera connected to WiFi network can now switch to another WiFi network (a WiFi test is not possible due to technical reasons)
- General bugfixes and improvements
For all Pan and Tilt cameras:
- Tour Feature
- One-Step Pan and Tilt control
What is new in version 1.10 ?
- new signed activeX control plugin
- fixed issue with audio tone activation via multimedia > audio
- fixed issue with cameras mobileresolution /tmpfs/auto.jpg used for MJPEG in lower resolution
- fixed issue with photo series with fixed name (Bug from WebUI 1.9(213)
- fixed issue with creating QR code
- fixed issue with missing sub model number for updater
- fixed issue with web browser caching the web sites (after the update and one first initial reload of the webUI the code should completely be loaded from the camera)
- fixed issue with showing wrong language after Reset, after Backup and after Update
- fixed issue with video for linux machines
- fixed issue with reloading webUI to new iframe level
- fixed issue with loading the overlay with slow response time
- general code improvement which should lead to singificant increase of the loading speed of the webUI (especially via camera LAN IP)
- general bugfixes, changes and typos
What is new in version 1.9 ?
- Push Notifications are now possible with our App InstarVision (iOS and Android)
- ActiveX Plugin is now also supported for Chrome and Firefox on Windows
- Scheduled activation and deactivation of the cameras IR LEDs
- Solving issues with the 1und1 Email Server
- A new integrated INSTAR Emailserver is now available to sent emails
- A second Email receiver can now be added
- PTZ limitations (for cameras with PTZ)
- If an alarm is caused the camera can now move to a defined position (for cameras with PTZ)
- Alarm signal can be played during alarm. The internal speaker or audio output will be used
- automatic wifi test
- language detection through web browser
- automatic status check of the SD card
- New NTP Servers
- Improvements, Bugfixes and TYPOS
What is new in version 1.6 ?
- Default SMTP settings for 1und1 adjusted
- Problems with the audio function solved while using P2P
- Small problem solved when saving alarm actions
What is new in version 1.5 ?
- Problems with the loss of Gateway is solved (this could have caused the camera be not reachable anymore or that it doesnt sent any more alarm messages)
- Extended SMTP settings, predefined standard SMTP servers
- Refresh function when viewing the LOG file
- Minor Bug fixes...
What is new in version 1.4 ?
- Video recording by schedule on SD card
- Change the number of snapshots (email, FTP, SD)
- Resolution of snapshots
- Schedule for photo series
- Pre-selection of email providers
- Coupling of alarm input and motion detection (When an alarm triggers e.g. external motion, and the software of the camera also detects motion within 5 seconds, then an alarm is generated)
- Problems with some email providers fixed (GMX, Web.de ...)
- Setup Wizard after reset the camera
- Fixed GMT + 1 / daylight saving time issues
- Audio alarm (triggered by noise)
- Extension to the languages French and Chinese
- P2P Point to Point connection (supports external access regardless of the Internet connection via the App InstarVision). Thus, also connections over IPv6, mobile internet, etc. are possible.
- Minor bug fixes...
|
