IN-PoE 4200 - Gigabit PoE Switch

IN-PoE 4200 Gigabit PoE Switch

The IN-PoE 4200 PoE Switch is a Gigabit Switch that can provide 10/100/1000M Ethernet Data and Power over Ethernet cable. As an Ethernet Power Sourcing Equipment (PSE), this switch is a very smart and safe equipment for Wireless APs, IP Cameras and IP based network equipment. Full-Duplex Flow-Control ensures fast and steady data transfer. Compared to other PoE switches in the market, the IN-PoE 4200 is designed to automatically detect and identify whether the connected devices such as IP cameras comply with standard IEEE PoE 802.3af / 802.3at and supply power for them accordingly. Important! Our PoE devices transfer power over pin 4 & 5 (+) and 7 & 8 (-). To prevent any possible damages we urge you to check the compatibility of your PoE end-device first.

Easy Plug & Play Setup

It can't be more simple and straight-forward. The installation is quickly done by connecting your PoE devices. An external power adaptor and a power cable is included in this package.

Put an end to power cables

All four Ethernet ports of the IN-PoE 4200 support Power-over-Ethernet. Use PoE for applications that are far from power outlets or when you want to minimize the clutter of extra cables. A simple Cat 5 RJ45 cable can establish a data connection and supply power at the same time. This makes an external power supply obsolete.

Power Supply & Port Priority

Each PoE port has an output of max. 25.5Watt via IEEE802.3af or 30Watt via IEEE802.3at and has a total output of 120W. The Port Priority will protect your devices if the total power consumption of all powered devices are higher than specified. The ports of the IN-PoE 4200 will be sorted by prirority ranking from highest priority (Port 1) to lowest priority (Port 4). The power supply of the lowest priority will be turned off.

Cable- & Connection Diagnosis

Built-in indicators help you to quickly determine damaged cables and shorten devices.

Spare Parts

4m cable with connectors for IN-5907HD and IN-7011HD series

Specification

specification

Fonctionnalités du réseau

Type de switch Switch non administrable (Plug & Play)

Normes de réseau prises en charge IEEE802.3, IEEE802.3u, IEEE802.3af, IEEE802.3at, IEEE802.3x (Contrôle de flux en duplex intégral)

Lien montant Auto MDI / MDI-X

Ports 2 ports d'uplink, 4 ports (prise en charge PoE)

Puissance de sortie PoE max. 25.5 watts (802.3af), max. 30 watts (802.3at)