This is a demo store. Any orders placed through this store will not be honored or fulfilled.

Welcome to the US Store

    Telekom Speedport



    Setting up port forwarding in your Telekom Speedport

    To access your camera through the internet you will need a portforwarding service inside your router. For more general information about the ddns access please refer to HERE.


    Telekom Speedport (300, 500 and 700 Series)

    In your router please click on Netzwerk and then choose NAT & Portregeln. If you have a W500V Speedport router then you have to also choose Neues Gerät hinzufügen at NAT & Portregeln so you add the camera as a new device in the router. Therefor you need to know the MAC address of your IP camera. You can check the cameras MAC address by opening the command line in windows which you find at "Start - Programs - Accessories - Command". This will open a small window in Dos Mode. Here you can simply type in "arp - a". This will list you all IP addresses that your computer is connected with including the MAC address. Search for your cameras IP and write down the MAC address of the camera. Now please go back in the Speedport router and add the device. All other Speedport routers normally do not need this setting.


    Telekom Speedport Portforwarding
    Go to Netzwerk/NAT und Portregeln to set a new port forwarding rule for your camera.



    Auswahl: Here please do not choose anything. Or you could choose "HTTP Server" which will use the default web port 80.

    Bezeichnung: Here please choose a name for the forwarding rule. For example "IP Camera" or "InstarVision"

    Gültig für Gerät: Now please choose the device name or the IP address of your IP camera. This should be the same address that you are using in order to open your IP camera in the web browser. Mostly this address should start with 192.168.2.x

    Umgeleitete Ports - Öffentlich: Please choose 80 as your port. If you do not want to choose Port 80 you have to make sure that later when you try to access the camera that you also have to type in the Port in the address bar with ":" for example xxx.ddns-instar.com:87 in case you are using Port 87. Umgeleitete Ports - Private Client: As default you can fill in 80. If you are using InstarVision and you want to do Portforwarding to the integrated web server you also have to fill in 80 if you didn't change the Port inside the software.


    More Cameras

    If you are using more then one camera you have to also create another Port rule for each camera.Please make sure that the Öffentliche Port is always different for each port forwarding. For example if you are using Port 80 for the first camera then the second camera should have the Port 81 and the third camera Port 82 and so on.


    To open each camera you would type in something like this:


    Camera 1
    ab1234.ddns-instar.com:80
    Camera 2
    ab1234.ddns-instar.com:81

    and so on...


    Note: You can access all cameras with only one internet address. Only the Port at the end has to be changed. Therefore, you do not have to remember all DDNS addresses of the camera. You only need to remember one address.


    Telekom Speedport (900 Series)

    To access the user interface of your router open the following address with your internet browser http://192.168.2.1 . The default login can be found on a sticker on the back of the router. Navigate to the "Portfreischaltung" in the "Internet" tab. Click on "Weitere TCP Umleitung anlegen" and pick your cameras IP address from the drop-down menu. You can find your cameras IP address using our IP Camera Tool. Type your cameras port - the default port is 80 - into all 3 fields and click "Speichern" to save the service.


    Telekom Speedport Portforwarding
    Go to Internet/Portfreischaltung to set a new port forwarding rule for your camera.


    Your camera can now be reached via the ddns address that can be found under System/Info in your cameras user interface (s. above). In case the port 80 is already taken in your network you will have to change the camera port under Network/Basic Network Settings and of course adjust the portforwarding service to the new port.


    Telekom Speedport Portforwarding
    Use your personal internet address under System/Info in the camera's web user interface to your camera from the road.



    More Cameras

    If you are using more then one camera you have to also create another Port rule for each camera.Please make sure that the Öffentliche Port is always different for each port forwarding. For example if you are using Port 80 for the first camera then the second camera should have the Port 81 and the third camera Port 82 and so on.


    To open each camera you would type in something like this:


    Camera 1
    ab1234.ddns-instar.com:80
    Camera 2
    ab1234.ddns-instar.com:81

    and so on...


    Note: You can access all cameras with only one internet address. Only the Port at the end has to be changed. Therefore, you do not have to remember all DDNS addresses of the camera. You only need to remember one address.



    Related Topics