This is a demo store. Any orders placed through this store will not be honored or fulfilled.

Welcome to the US Store

    Alarm Recording



    Set record path for video recording (IE browser only)

    In order to record in Windows 8 / 7 / Vista you will need to add the IP address of your IP camera to the list of trusted sites. In order to do so please open your Internet Explorer and go to Tools - Internet Options - Security - Trusted sites - Sites to add the IP address of your camera. You will need to remove the checkmark by Require server verification (https:) for all sites in this zone so that you can add the IP as http. After that please reload the cameras ip address in your web browser and you should be able to set the record path accordingly. If you can still not set the record path please make sure you have started the Internet Explorer with admin rights.


    HD Camera Series

    Step 1

    Open the web interface in the Internet Explorer and click the path settings on the lower right side (see below).

    Set the Record Directory (HD)
    Open the settings menu for the ActiveX media control element.



    Step 2

    Choose the directory in which the recordings should be saved.

    Set the Record Directory (HD)
    Choose a directory for your snapshots and video recordings.



    Step 3

    By clicking Record you can start the recording. The word Record will be shown in red once the recording started. Additionally the Rec will start lighting up below the video. Another click on Record will end the recording.

    Set the Record Directory (HD)
    Clicking on Record will start a manual recording.



    INFORMATION ABOUT RECORDING: The recording during an motion detection can only be saved to the SD card inside the camera. This recording mode as explained above is only for manual recordings. The Action which the camera should do during a motion detection can be set in the menu Alarm / Actions.

    You can also record the video with our additional software InstarVision or any other third party software.


    VGA Camera Series

    The camera is using a ActiveX plugin to record videos... this is currently only supported by Internet Explorer. This is why the video recording is only possible with a windows computer. The recordings directory can be set under Alarm/Path and the recording be started by clicking on Record above the camera's live video.

    In order to record in Windows 8 / 7 / Vista you will need to add the IP address of your IP camera to the list of trusted sites. In order to do so please open your Internet Explorer and go to Tools - Internet Options - Security - Trusted sites - Sites to add the IP address of your camera. You will need to remove the checkmark by Require server verification (https:) for all sites in this zone so that you can add the IP as http. After that please reload the cameras ip address in your web browser and you should be able to set the record path accordingly. If you can still not set the record path please make sure you have started the Internet Explorer with admin rights.

    The recording with (1 frame per second) is possible if you are recording with FTP upload. The camera can upload a picture every second in case of an alarm. All you need is a FTP server or a network HDD which can also be set with an FTP access. You can also record the video with our additional software InstarVision or any other third party software. If you are using a QNAP or Synology Disk Station you can also simply add the camera in the Surveillance Software on the Disk Station.



    Related Topics