This is a demo store. Any orders placed through this store will not be honored or fulfilled.

Welcome to the US Store

    List of CGI commands (VGA)


    For all developers that want to integrate our cameras in their software or for everyone that wants to experiment a little, we now offer a full list of all CGI commands that can be used with our IP cameras. Please understand that this list is only for advanced users who know what they are doing. We can not give any technical support regarding our CGI commands.

    Click here to download the complete CGI command list:


    Video

    /videostream.cgi[?user=&pwd=&resolution=&rate=]

    
        resolution:(8:320*240,32:640*480)
        
        rate: 0-23
    
        0:highest/fastest
    
        1:20 fps
    
        3:15 fps
    
        6:10 fps
    
        11:5 fps
    
        12:4 fps
    
        13:3 fps
    
        14:2 fps
    
        15:1 fps
    
        17:1 fp/2s
    
        19:1 fp/3s
    
        21:1 fp/4s
    
        23:1 fp/5s
    
      

    For example: If your IP is 192.168.1.190 and Port is 81 and you want a resolution of 640*480 and the fastest speed of fps then you have to type in the following:

    http://192.168.1.190:81/videostream.cgi?user=admin&pwd=&resolution=32&rate=0

    Snapshot

    /snapshot.cgi[?user=&pwd=&next_url=]

    After next_url the user can type in the name of the picture. If you dont include next_url then the picture will automaticly get the name (DeviceAlias + current time.jpg)

    Examples:

    http://192.168.1.190:81/snapshot.cgi?user=admin&pwd=
    http://192.168.1.190:81/snapshot.cgi?user=admin&pwd=&next_url=test

    Video & Audio

    Settings are the same as videostream.cgi above.

    Examples:

    http://192.168.1.190:81/videostream.asf?user=admin&pwd=&resolution=32&rate=0

    Configuration:

    /camera_control.cgi?param=&value=[&user=&pwd=&next_url=]

    With the paramenter & value you can set resolution, brigthness, etc. ...

    
      0 : RESOLUTION
    
        2 : qqvga
    
        8 : qvga
    
        32 : vga
    
      1 : BRIGHTNESS 0~255
    
      2 : CONTRAST 0~6
    
      3 : MODE
     
        0 : 50hz
    
        1 : 60hz
    
        2 : Outdoor
    
      5 : ROTATION
    
        0 : Default
    
        1 : Flip Vertical
    
        2 : Level Image
    
        3 : Flip + horizontal Mirror Image
    
      

    Pan & Tilt

    /decoder_control.cgi?command=[&onestep=&user=&pwd=&next_url=]

    
        tilt up="/decoder_control.cgi?command=0&onestep=1&user=&pwd="
    
        tilt down="/decoder_control.cgi?command=2&onestep=1&user=&pwd="
    
        pan left="/decoder_control.cgi?command=4&onestep=1&user=&pwd="
    
        pan right="/decoder_control.cgi?command=6&onestep=1&user=&pwd="
    
        home pos="/decoder_control.cgi?command=25"
    
      

    For a direct position change use:

    
        Pos01 = /decoder_control.cgi?command=31&user=&pwd=
    
        Pos02 = /decoder_control.cgi?command=33&user=&pwd=
    
        Pos03 = /decoder_control.cgi?command=35&user=&pwd=
    
        Pos04 = /decoder_control.cgi?command=37&user=&pwd=
    
        Pos05 = /decoder_control.cgi?command=39&user=&pwd=
    
        Pos06 = /decoder_control.cgi?command=41&user=&pwd=
    
        Pos07 = /decoder_control.cgi?command=43&user=&pwd=
    
        Pos08 = /decoder_control.cgi?command=45&user=&pwd=
    
        Pos09 = /decoder_control.cgi?command=47&user=&pwd=
    
        Pos10 = /decoder_control.cgi?command=49&user=&pwd=
    
        Pos11 = /decoder_control.cgi?command=51&user=&pwd=
    
        Pos12 = /decoder_control.cgi?command=53&user=&pwd=
    
        Pos13 = /decoder_control.cgi?command=55&user=&pwd=
    
        Pos14 = /decoder_control.cgi?command=57&user=&pwd=
    
        Pos15 = /decoder_control.cgi?command=59&user=&pwd=
    
      

    Automatic Patrol

    /set_misc.cgi?[led_mode=&ptz_center_onstart=&ptz_auto_patrol_interval=&ptz_auto_patrol_type=&ptz_patrol _h_rounds=&ptz_patrol_v_rounds=&user=&pwd=&next_url=]

    
        ptz_center_onstart:=1,activate center on start
    
        ptz_auto_patrol_interval:automatic patrol,=0:no automatic control
    
        ptz_auto_patrol_type:0:No;1:horizontal;2:vertical;3:horizontal and vertical
    
        ptz_patrol_h_rounds:Horizontal patrol laps,0:Infinite
    
        ptz_patrol_v_rounds:Vertical patrol laps,0:Infinite
    
        ptz_patrol_rate:Head Speed manual,0-100,0:Fastest
    
        ptz_patrol_up_rate:automatic cruise speed (up):0-100,0:slowest
    
        ptz_patrol_down_rate:automatic cruising speed (down):0-100,0:slowest
    
        ptz_patrol_left_rate:cruising speed automatic (left):0-100,0:slowest
    
        ptz_patrol_right_rate:cruising speed automatic (right) :0-100,0:slowest
    
      

    Alarm

    If you want to activate or deactivate the alarm function please enter the following command:

    http://192.168.1.196/set_alarm.cgi?motion_armed=1&user=admin&pwd=

    (Alarm activated)


    http://192.168.1.196/set_alarm.cgi?motion_armed=0&user=admin&pwd=

    (Alarm deactivated)

    Related Topics