This is a demo store. Any orders placed through this store will not be honored or fulfilled.

Welcome to the US Store

    List of CGI commands (HD)


    For all developers that want to integrate our cameras in their software or for everyone that wants to experiment a little, we now offer a full list of all CGI commands that can be used with our IP cameras. Please understand that this list is only for advanced users who know what they are doing. We can not give any technical support regarding our CGI commands.

    Software


    More

    Network


    More

    System


    More

    Multimedia


    More

    Alarm


    More

    Recording


    More

    Complete


    More

    Video

    
      rtsp://admin:instar@IP-Address:RTSP-Port/11 :: VLC Stream
    
      http://admin:instar@IP-Address:Port/iphone/11 :: Quicktime Stream
    
      http://IP-Address:Port/tmpfs/snap.jpg?usr=admin&pwd=instar :: Snapshot (720p / 1280x720 Pixel)
    
      http://IP-Address:Port/tmpfs/auto.jpg?usr=admin&pwd=instar :: Snapshot (352p or 176p)
    
      http://IP-Address:Port/cgi-bin/hi3510/mjpegstream.cgi?-chn=11&-usr=admin&-pwd=instar :: MJPEG Stream
    
      

    also note the additional SDK documentation for accessing video / audio

    Pan & Tilt

    
        http://IP-Address:Port/cgi-bin/hi3510/ptzctrl.cgi?-step=0&-act=right :: Moves continuously right
    
        http://IP-Address:Port/cgi-bin/hi3510/ptzctrl.cgi?-step=0&-act=left :: Moves continuously left
    
        http://IP-Address:Port/cgi-bin/hi3510/ptzctrl.cgi?-step=0&-act=up :: Moves continuously up
    
        http://IP-Address:Port/cgi-bin/hi3510/ptzctrl.cgi?-step=0&-act=down :: Moves continuously down
    
        http://IP-Address:Port/cgi-bin/hi3510/ptzctrl.cgi?-step=0&-act=stop :: Stops moving camera-head
    
        http://IP-Address:Port/cgi-bin/hi3510/ptzctrl.cgi?-step=1&-act=right :: Moves one step right
    
        http://IP-Address:Port/cgi-bin/hi3510/ptzctrl.cgi?-step=1&-act=left :: Moves one step left
    
        http://IP-Address:Port/cgi-bin/hi3510/ptzctrl.cgi?-step=1&-act=up :: Moves one step up
    
        http://IP-Address:Port/cgi-bin/hi3510/ptzctrl.cgi?-step=1&-act=down :: Moves one step down
    
        http://IP-Address:Port/cgi-bin/hi3510/ptzctrl.cgi?-step=0&-act=home :: Go to Center Position
    
        http://IP-Address:Port/cgi-bin/hi3510/ptzctrl.cgi?-step=0&-act=hscan :: Scan horizontal
    
        http://IP-Address:Port/cgi-bin/hi3510/ptzctrl.cgi?-step=0&-act=vscan :: Scan vertical
    
        http://IP-Address:Port/cgi-bin/hi3510/preset.cgi?-act=set&-status=1&-number=[0-7] :: set a position
    
        http://IP-Address:Port/cgi-bin/hi3510/preset.cgi?-act=set&-status=0&-number=[0-7] :: unset a position
    
        http://IP-Address:Port/cgi-bin/hi3510/preset.cgi?-act=goto&-status=1&-number=[0-7] :: goto to a set position
    
      

    Image

    http://IP-Address:Port/cgi-bin/hi3510/param.cgi?cmd=setimageattr :: Sets the Image Parameter

    You can set the following parameters:

    
        brightness :: [0 - 255] the bigger the value the brighter the image
    
        saturation :: [0 - 255] the bigger the value the more saturation the image has
    
        contrast :: [0 - 255] the bigger the value the more contrast the image has
    
        hue :: [0 - 127] the bigger the value the more hue the image has
    
        flip :: (on , off) flips the image
    
        mirror :: (on , off) flips the image
    
        scene :: (auto , indoor , outdoor) sets the white balance mode
    
      

    Example:

    http://IP-Address:Port/cgi-bin/hi3510/param.cgi?cmd=setimageattr&-brightness=0&-saturation=0&-contrast=0&-hue=0&-flip=off&-mirror=off&-scene=auto

    WLAN

    Reset the Parameter Values

    http://192.168.xxx.xxx./cgi-bin/hi3510/param.cgi?cmd=setwirelessattr&-wf_ssid=SSID&-wf_enable=0&-wf_auth=2&-wf_key=1234&-wf_enc=1&-wf_mode=0

    IR-LED

    
        http://192.168.178.87/cgi-bin/hi3510/param.cgi?cmd=setinfrared&-infraredstat=auto :: Sets IR LED's to auto mode
    
        http://192.168.178.87/cgi-bin/hi3510/param.cgi?cmd=setinfrared&-infraredstat=open :: Sets IR LED's always active :: only IN-6011
    
        http://192.168.178.87/cgi-bin/hi3510/param.cgi?cmd=setinfrared&-infraredstat=close :: Sets IR LED's always inactive
    
      

    ALARM

    
        http://admin:instar@192.168.xxx.xxx/cgi-bin/hi3510/param.cgi?cmd=setmdattr&-enable=1&-name=1 :: enables the md area 1
    
        http://admin:instar@192.168.xxx.xxx/cgi-bin/hi3510/param.cgi?cmd=setmdattr&-enable=0&-name=1 :: disables the md area 1
    
        http://192.168.x.x/cgi-bin/hi3510/param.cgi?cmd=setioattr&-io_enable=1&-io_flag=1 :: enable / disable external alarm in to trigger recording
    
      

    Example:

    http://admin:instar@192.168.xxx.xxx/cgi-bin/hi3510/param.cgi?cmd=setmdattr&-enable=0&-name=1&cmd=setmdattr&-enable=0&-name=2&cmd=setmdattr&-enable=0&-name=3&cmd=setmdattr&-enable=0&-name=4

    Related Topics